Every Cobra size is $2,000 off this Black Friday: the Cobra 8 (90W), Cobra 10 (100W) and Cobra 14 (130W). The deal runs through Cyber Monday, November 30, at 11:59 PM Pacific, while limited stock lasts. All three are CO₂ glass tube workshop lasers with 1,200 mm/s motion, autofocus and a camera, built for cutting and engraving wood, acrylic and signs.
Why this Cobra deal stands out
The Cobra sits in the BFCM Deal tier of OneLaser’s Black Friday sale, the discount open to everyone through November 30. What makes it unusual is the structure: the same $2,000 comes off every size, from the compact Cobra 8 to the large-format Cobra 14.
A flat discount works hardest on the smaller machines. The Cobra 8 lands at roughly a third off MSRP, the Cobra 10 at about 29% and the Cobra 14 at about 22%. If you’ve been weighing two sizes, the gap between them is smaller now than it will be in December.
Pick your Cobra size
-
Cobra 8, 90W
$2,000 off- Work area31.5" × 19.7" (800 × 500 mm)
- Z travel5.9" (150 mm)
- Footprint58" × 41" × 26", 397 lb (180 kg)
- Best forStudios moving up from a desktop laser that want a real cutting bed
-
Cobra 10, 100W
$2,000 off- Work area39.4" × 23.6" (1,000 × 600 mm)
- Z travel11" (280 mm)
- Footprint66" × 43" × 37", 595 lb (270 kg)
- Best forFull-time sellers batching signs, ornaments and acrylic, plus taller pieces
-
Cobra 14, 130W
$2,000 off- Work area55.1" × 35.4" (1,400 × 900 mm)
- Z travel11" (280 mm)
- Footprint76" × 54" × 37", 772 lb (350 kg)
- Best forLarge signage, full sheets and the thickest cutting in the Cobra line
Measure doorways and check floor load before you order. The Cobra 14 weighs over 770 lb and needs room to get in, not just room to run.
What every Cobra comes with
- Laser source90W, 100W or 130W CO₂ glass tube
- MotionUp to 1,200 mm/s with 2G acceleration on DSP control, ±0.01 mm repeat accuracy
- Alignment16MP camera, autofocus and red-dot preview
- Air assistSmart dual air assist that switches between high pressure for cutting and low for engraving
- Material handlingFixed honeycomb table, ball-screw Z axis and front-to-rear pass-through for long stock
- WorkflowMagSwitch tool-free lens holder, touchscreen control and power-loss job resume
- SoftwareLightBurn
- SafetyFully enclosed Class 1 design with lid sensors and high-temperature shutoff
Acceleration is where workshop lasers lose time. Every line end and corner forces the head to slow down and speed up again. Higher acceleration means less idle travel, so detailed engraving finishes sooner at the same top speed. For the full feature breakdown, see why the Cobra Series fits a small business.
What makers and technicians say about the Cobra
-
Joe Braga, Engraver’s ChoiceLaser technician with 35 years of installation, training and service work
“I’ve seen it maintain both speed and quality at the same time.”
Joe installs and services lasers from many brands, so he looks inside the machine. On the Cobra, he noted a light, solid laser head with very little overtravel at 1,200 mm/s, and power that holds up at full speed instead of fading the engraving. He also pointed to a secured honeycomb table, tinned and shielded wiring, numbered terminals and properly torqued connections. He says he rarely has to make beam corrections when installing OneLaser machines.
-
James Faytol, ESENTL LaserHydeLeatherette supplier who tested the Cobra 10 on hat patches
“I was actually very shocked by the precision quality.”
James ran a detailed logo shrunk to 2 inches on leatherette and was impressed by the small detail from a glass tube machine. He’s also candid about the trade-off. The Cobra 10 left a little soot to wipe off, while the RF-powered XRF 38W RF came out clean, so his pick for premium patches is RF. For a versatile machine that engraves and cuts many products, he rates the Cobra highly.
Is the Cobra the right machine for you?
- A strong fit: you mostly cut and engrave wood, acrylic and leather, you make signs, ornaments and layered decor, and you want the most bed for your budget.
- Fine detail is the product: glass tube precision sits below RF. For leatherette patches and tiny text, the XRF 38W RF is the better tool, and it’s a Super Deal this week.
- RF detail at production speed: the Hydra 7 Pro 70W RF carries the biggest discount in the sale.
- Mostly tumblers: the VertiGo 38W RF is built for drinkware.
Holiday orders the Cobra handles well
The big bed is the advantage in December. A full sheet of cut ornaments, a run of layered signs or a batch of acrylic displays fits in one job instead of three. Lay out your bestsellers to fill the bed, test once and let it run while you pack orders.
Before you check out
- Shipping: Cobra machines ship freight at a separate charge. Free shipping in this sale covers only the XRF 38W RF and VertiGo.
- Cooling and space: glass tubes are water-cooled, so plan room for the chiller and confirm what ships with your size. Add ventilation and a suitable circuit to your checklist.
- Metal: the CO₂ tube handles non-metals and coated surfaces. For bare metal, ask the team about the optional IR module before you count on it.
- Section 179: equipment placed in service by December 31 may be deductible this year. Ask your tax advisor.
- Financing: businesses can apply for lease-to-own financing through Clicklease.
- Training: a one-on-one session with a OneLaser engineer covers setup and LightBurn.
- Policies: no discount code is needed. See the refund policy and warranty policy for terms.
Comparing the Cobra with the rest of the lineup? The full OneLaser Black Friday 2026 roundup covers every machine on sale.
Take $2,000 off any Cobra size
Cobra 8, 10 or 14, through November 30 or until stock runs out. Not sure which size fits your shop? A U.S. laser expert can size it to your products and space on a free call.
Frequently asked questions
How much is the Cobra off for Black Friday?
Every Cobra size is $2,000 off: the Cobra 8 (90W), Cobra 10 (100W) and Cobra 14 (130W). The price applies automatically at checkout with no code.
When does the Cobra deal end?
The deal ends Cyber Monday, November 30, 2026, at 11:59 PM Pacific Time, or earlier if stock sells out.
Which Cobra size should I buy?
The Cobra 8 suits studios moving up from a desktop laser. The Cobra 10 fits full-time sellers who batch products. The Cobra 14 is for large signage and full sheets. Check floor space and delivery access for the larger sizes.
Is the Cobra an RF laser?
No. The Cobra uses a CO₂ glass tube, which offers strong cutting power and the most bed for the budget. For RF-level engraving detail, look at the XRF 38W RF or the Hydra 7 Pro.
Does the Cobra ship free?
No. Cobra machines ship freight at a separate charge. Free shipping in the sale applies to the XRF 38W RF and VertiGo.
Can the Cobra engrave metal?
The CO₂ tube marks coated surfaces but not bare metal. Ask the OneLaser team about the optional IR module if you need bare-metal engraving.
Offer valid through November 30, 2026, 11:59 PM PT, while supplies last. Prices in USD. Percentage savings are approximate and based on MSRP. Reviewer quotes are excerpts from published articles linked above. Section 179 information is general and not tax advice.
