Share
Contents

Is LightBurn a good software for laser engraving? For most people running a CO₂ or RF machine, yes, and it's what I'd point a new owner to first. It lets you draw, lay out and run the job from one window, it talks to the controllers most cabinet and desktop lasers use, and you can try the whole thing free before you pay. It isn't perfect, though, and a couple of its quirks catch nearly everyone in the first week.

Key Takeaway

  • LightBurn is a solid choice for CO₂ and RF laser owners
  • The trial runs 30 days with nothing locked
  • The licence is a one-time purchase and not a subscription
  • DSP controllers such as Ruida need the Pro licence
  • Expect a learning curve in your first couple of weeks
  • Networked lasers must be added by hand

1. Is LightBurn a Good Software for Laser Engraving?

Yes. LightBurn is good laser engraving software because it combines design, layout and machine control in one program and supports the common controller types. It suits beginners who want a single tool to learn and shops that run several machines. It's less suited to people who only need a free tool for an occasional job.

That's not just our view. Tom's Hardware's look at laser software describes it as a good choice both for established workshops with several lasers and for newcomers. That range is the main reason it has become the default for so many owners.

Verdict on whether LightBurn is a good software for laser engraving

2. What LightBurn Does Well

LightBurn's strength is that you rarely have to leave it. You can import artwork or draw it, assign settings by layer, preview the job, frame it on the material and send it to the laser without touching another program. Material tests, camera alignment and rotary jobs are all built in.

a. Design and control in one place

Older workflows meant drawing in one program, exporting, then opening a separate control program that came with the machine. LightBurn handles vector editing, text, image tracing and job control together, which removes a lot of small file-juggling mistakes.

Design and control in one place

b. Layers and material tests

Every color in your design is a layer with its own speed, power and mode. That's how you engrave and cut in the same job. The built-in test generator burns a grid of settings on an offcut so you can pick the square you like, and we walk through it in our guide to the LightBurn material test.

Layers and material tests

c. Camera and rotary support

If your machine has a lid camera, LightBurn can overlay your design on a live picture of the bed after camera calibration. It also has a rotary mode for tumblers and bottles, covered in our rotary setup guide.

Camera and rotary support

3. Where LightBurn Falls Short

LightBurn has three weak spots worth knowing before you buy. There's a real learning curve, the licence you need depends on your controller, and network connections on Ruida-based machines have to be set up by hand. None of them is a reason to avoid it. All of them are easier if you expect them.

a. The learning curve

There are a lot of panels and a lot of settings, and the first few evenings can feel like too much. Most of it you can ignore at the start. Learn layers, the Cuts window and the preview, and the rest comes as you need it. If you'd rather be shown, we've listed some good laser engraving training options, and the LightBurn forum is unusually helpful.

b. Licence tiers and controller match

Buy the wrong tier and LightBurn simply won't connect to your machine. It's the most common avoidable mistake, and the next section sorts it out.

c. Network quirks on Ruida controllers

LightBurn can't find a networked Ruida laser on its own. You add it manually with its IP address, as LightBurn's Ethernet guide explains. It's worth the ten minutes. Rick, a member of the LightBurn forum, told another user that his Ruida is far more stable over Ethernet than over USB, and you can read that exchange in this forum thread. Our own walkthrough shows how to connect your laser to LightBurn each way.

Pros and cons when asking is LightBurn a good software for laser engraving

4. Which LightBurn Licence Do You Need?

LightBurn sells two licences. Core covers G-code lasers, which means most diode and entry-level machines. Pro covers everything in Core plus DSP and galvo controllers. CO₂ and RF machines with a Ruida controller, including OneLaser's, need Pro. Both are one-time purchases that include a year of updates.

a. G-code or DSP

If you're not sure which you have, check the controller. A machine with its own screen and keypad that stores jobs is almost certainly DSP. Our explainer on DSP vs G-code controllers has the detail. A LightBurn Pro licence covers every OneLaser machine.

b. Try it first

LightBurn offers a 30-day trial with nothing locked and no watermarks, so you can run real jobs on your own machine before deciding. The licence itself never expires. After the first year you can keep the version you have or pay to add another year of updates, and one key can be active on up to three computers. LightBurn's install guide covers setup on Windows and Mac.

Which licence you need if LightBurn is a good software for laser engraving on your machine

5. LightBurn vs Other Laser Software

The usual alternatives are the control program that ships with DSP machines and the free tools made for diode lasers. Both will run a job. Neither is as pleasant to design in, and that's the gap LightBurn fills. If you only ever send finished files to the machine, the free route can be enough.

a. RDWorks

RDWorks comes with Ruida controllers at no cost and does the essentials. Its drawing tools are basic and the interface shows its age, so many owners keep it installed as a backup and do their daily work in LightBurn.

b. Free tools

Free programs for G-code machines are fine for simple engraving on a diode laser. They don't support DSP controllers, so they're not an option for most CO₂ and RF machines. Our round-up of the best laser engraving software compares the wider field.

6. FAQ

Is LightBurn good for beginners?

Yes. There's a lot on screen at first, but you only need layers, the Cuts window and the preview to run your first jobs.

Is LightBurn a one-time purchase?

Yes. The licence is perpetual and includes a year of updates. After that you can stay on your version or pay for another year of updates.

Does LightBurn work with Ruida controllers?

Yes, with the Pro licence. Core only supports G-code lasers.

Is there a free trial of LightBurn?

Yes. It runs for 30 days with every feature available and no watermarks.

Is LightBurn better than RDWorks?

For designing and day-to-day use, most owners think so. RDWorks is free and still useful as a backup.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

By submitting, you agree to receive follow-ups from the OneLaser team (human or AI) by email, phone, or text regarding your inquiry.

Our Top Picks

New to LightBurn?

Book a 1-on-1 session and learn it on your own machine.
Book LightBurn Training
Take the Next Step with OneLaser Financing